German
Chinese
Italian
French
Vietnamese
Ukrainian
- Product Charm
- Cleaning Guarantee
- Daily Maintenance
- Parameter
Easily handle each kind of floor environment
Capable of cleaning a house with a size of 150-200 square meters, continuously working for 120minutes
Buy nowGet to know the cleaning effect of A338
Walking on your feet freely
The floor cleaned by the robot vacuum cleaner is so clean without bacteria and dust so that you could walk on your feet at ease.
The charm of A338
Keep the house clean and tidy every day
The functions of “ Sweep, Mop, Vacuum, Sterilization” makes the
cleaning more thoroughly!
Nice Exterior
Easy to use with 3 smart touch buttons in the big LCD touch screen
Artistic Details
In order to give users good visual sense, Liectroux Robot Vacuum Cleaner A338 is designed elaborately with smooth streamline and appreciating details.
Strict Tests
Each production procedure is under strict tests to make sure of the product quality
“Schedule Cleaning”
The robot will do the cleaning at scheduled time and when you return home, the house has been cleaned.
The cleaning effect
Anti-collision Sensors
There are four infrared sensors that will prevent the robot from running into furniture or other barriers.
Auto Recharging
The signal of recharging extends to 180 degree so that the
robot will go back to the charging station at low battery automatically.
Keep Home Healthy
The UV light disinfects the bacteria mites so as to keep
home healthy.
Two-infrared Virtual Blocker
The creative two-infrared virtual blocker better controls the cleaning areas and keeps the robot away from your space.
Anti-fall Sensors
There are anti-fall sensors on the bottom that keeps the
robot from falling downstairs so that the robot will not be
damaged or do harm to your furniture.
Cross Barriers
Up-down wheels make the robot cross the barriers within height of 15mm easily.
Modular design makes daily and self maitenance available
Daily maintenance so easy
How to match the remote control with the robot vacuum cleaner?
First press "ENTER" button on the remote control for a few seconds and turn on the switch on the right side of the robot. If you could
hear "Beep" twice, then the matching is done. The remote control
could be used then. If you couldn't hear "Beep" twice, repeat above steps.
Take off the dustbin
Use your thumb to press the dustbin button on the top of the robot, and the other four fingers on the bottom of the robot,
then draw out the dustbin backwards. Pour out the dust.
(Please note the fan assembly should not be washed. Please refer to the User's Manual on fan assembly. )
Install Virtual Blocker
Open the cover at the bottom of the virtual blocker, and install the
battery as the picture. The negative side is close to the knob and
the other is the positive side.
Replace HEPA Filter
Break out the fastener on the right side of the dustbin thus open
the HEPA Filter bracket. Press the bracket with one hand making the fastener off the HEPA Filter and take out the HEPA Filter with the other hand, then replace the new HEPA Filter. (Please refer to User's Manual for details.)
HEPA Filter Cleaning
Take off the HEPA Filters as the above described, then use the
cleaning brush to wipe out the rubbish and dust. (As the left picture)
Mop Installation
Install the mopping pad vertically with the two card holes matching the two card slots on the bottom of the robot, then put the mopping pad horizontally. (Please refer to User's Manual for details.)
Parameter Overview
Choose one robot best for you
Diameter
32cm
Height
8.7cm
Weight
3.2kg
Battery
2200mAH Ni-MH
Dustbin Capacity
300ml
Power
25W
Charging Time
4-5 hours
Cleaning Time
90-120 mins
Noise
45DB
Side Brush
Single
Water Tank
-----
Cleaning with central brush
Yes
Intelligent Dust Detection
-----
UV Function
-----
Obstacle Avoidance
Yes
Anti-drop Sensors
Yes
Voice Prompt
-----
Auto Recharge
Yes
Remote Control
Yes
Cleaning Modes
Auto/Spot/Edge/Schedule
Map Navigation
-----
Wifi Control
-----
