German
Chinese
Italian
French
Vietnamese
Ukrainian
- Product Charm
- Cleaning Guarantee
- Daily Maintenance
- Parameter
Get to know the cleaning effect of Q8000
High Cleaning Coverage, Not Missing Any Part
The charm of Q8000
Smart and Latest Functions of Robot Vacuum Cleaner
Q8000 has the all the basic and the latest functions. It is as smart as human beings.
Make up the Missing Part, Clean the whole House Thoroughly
Wifi APP Control Easy to Use
It's easy to use with Wifi App control. Just finger's clicks, the robot vacuum will do all cleaning modes, schedule cleaning, mopping
and recharging.
Bionic Algorithm Improving Cleaning Efficiency
Intelligent zigzag regular cleaning path, say goodbye to the old
random cleaning, less energy consumption.
Partition Scheme High Cleaning Coverage
Q8000 will learn the whole house environment and make partition cleaning scheme. Thus the cleaning coverage is high with low
repetition rate. And not missing any part.
Bionic Algorithm Improving Cleaning Efficiency
Advanced gyroscope navigation and mapping system building
ensure the accuracy of the map.
Ultra high speed environment perception to detect the whole environment
The cleaning effect
Virtual Blocker
The virtual blocker will stop the robot vacuum entering to the areas you do not want it to go so that you don't have to watch it over.
Powerful Mode/ Low Noise
The suction power is adjustable. The powerful mode has strong suction power. The less powerful mode has low
noise, it is as quiet as not to disturb your work or rest.
Big Battery Lasting Long
2000mAh Lithium Battery can lasts for 100 minutes and
is enough to handle a big house of 250㎡ at a full charge.
Calculate the Shortcut Path to Recharge
The coordinate memory algorithm enables the robot
vacuum to detect the environment and find the shortcut to
recharge at low battery. If the charging station is not nearby,
it will return to the original point after finish cleaning at
enough power, not afraid to get lost.
Anti-collision
Infrared sensors will protect the robot vacuum from running
into furniture and turn around in time before collision so that it will protect itself and the furniture.
Anti-falling
The anti-falling sensors at the bottom can detect fall over 8cm to avoid falling down stairs.
Wet and Dry Mopping
Under Auto mode, the robot vacuum can do mopping as well. Under mopping mode, it will not vacuum and the fan and side brushes will stop working.
Climb across barriers without manual help
Liectroux Q8000 can climb across a slope of angle up to 15 degree and threshold of height up to 10mm.
Daily maintenance so easy
Clean the Roller Brush
A.Check side brushes for damage or foreign object on the brush.
B.Clean the side brushes
C.Remove the screws of the side brushes, Replace brushes with
new ones, Use screws to lock the new brushes in place
Clean Sensors and Charging Poles
Clean the sensors and charging poles per week or according to daily use to make sure the robot is well maintained.
Wipe the sensor window and auto charging sensors with a soft dry
cloth.
Clean charging contacts on self charging base
Clean vacuum intake and dust sensors as shown in the pictures.
Clean dustbin
Note: After taking out dustbin, check if there is foreign object stuck or block the vacuum passage and clean it if necessary.
A.Press "PUSH" to open the dustbin cover.
B.Take out the dustbin
C.Separate HEPA filter from dustbin.
D.Pull out dustbin top cover and take out primary filter.
E.Empty dustbin and wipe the dust.
F. Wash dustbin with water.
Clean and Replace Filters
Clean filters with cleaning brush tool.
Note: Clean dustbin module when the trash icon flashes on the display panel.
Install primary filter and HEPA filter into dustbin.
Note: 1. Install both HEPA and primary filters when they are
dry.
2. Do not place HEPA and primary filters directly in the sun.
Close dustbin cover and install it into main unit.
Note: Dustbin and Filters( including HEPA and filter) could be
replaced if needed.
How to handle the water tank trailing bar
1.Open the water injection hole, after water injected, stick the mop
to the right place.
2.Aim at the relevant holes and assemble the trailing bar on the
cleaner.
Parameter Overview
Choose one robot best for you
Diameter
34cm
Height
9cm
Weight
3kg
Battery
2000 mAh Li-Ion
Dustbin Capacity
300ml
Power
25W
Charging Time
270-300 mins
Cleaning Time
About 90 mins
Noise
50DB
Side Brush
Double
Water Tank
180ml
Cleaning with central brush
-----
Intelligent Dust Detection
Yes
UV Function
Yes
Obstacle Avoidance
Yes
Anti-drop Sensors
Yes
Voice Prompt
Yes
Auto Recharge
Yes
Remote Control
Yes
Cleaning Modes
Auto/Spot/Edge/Schedule
Map Navigation
Yes
Wifi Control
Yes
